Clearaudio Nano V2 Headphone MM/MC Phono Preamplifier – Black
The nano phono headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
The Nano phono stage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
Hexmat Zero Isolation Feet
From the makers of the Eclipse and yellow bird turntable mat comes a new design of isolation footer called Zero.
Available in a set of 3 (a 4th can be added if required) with various load ratings from 1kg to 30kg (combined load of equipment being placed on the feet).
Sold in a set of 3 for £360
3 different load ratings
1-6kg
5-15kg
10-30kg
Skyanalog P1M Moving Coil Cartridge
Skyanalog P1M capsule has a black aluminum housing, in which an Al stylus MC type motor with a Fineline diamond stylus profile has been installed. The collection needle has a 5x50um grind. The needle axis was placed at an angle of 20 degrees to the end of the bobbin body. The manufacturer recommends the 8.9g pill for light heavy arms, with an effective weight of 11-14g. The output voltage is 0.4 mV at a rate of 3.54 vm/s. The internal resistance of the pure copper crossover winding is 6.5 ohms, which should be terminated between 100 and 220 ohms per manufacturer’s recommendations. The pickup’s frequency response is accurate to +/-1dB between 20Hz and 20Khz, while channel separation is better than 30dB at 1Khz and channel balance is better than 0.5dB, which is an excellent value. The recommended needle pressure is 1.6 to 2.0 g, the recommended optimal value is 1.8 g.
Synergistic Research UEF Record Mat No. 1
KONDO AudioNote Japan AN-AI Internal Tonearm wire
Clearaudio Nano V2 MM/MC Phono Preamplifier – Black
The Nano phono stage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.
Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.