Mains
DIY
HiFi Cables
Power Supplies
Computer Audio
Vinyl Essentials
HiFi Equipment
Speakers
Headphones
Music
Ex-Dem Pass Labs INT-25 Integrated Amplifier
One unit ex-dem with remote and box
At Pass Labs we build Fet amplifiers with excessive output stages, huge heat sinks and massive power supplies. We use the highest quality components in simple linear topologies, assembled and tested with care and subtlety. They measure well, sound great, and are reliable. Twenty plus years of ongoing innovation have kept the X and XA amplifiers at the forefront of high-end audio.
The INT-25 embodies all this and less. A smaller stereo Class A amplifier at a lower price, it takes advantage of the lower power requirements to have simpler single-ended circuitry and fewer parts in the signal path. This also allows elimination of degeneration, “that other negative feedback” in all stages.
Download Owners Manual
Ex-Dem Pass Labs XA-25 – Stereo Power Amplifier
1 unit ex-dem with original packaging
No other offers apply or can be used
The new XA25 offers great sound at slightly lower power, without frills, at a lower price. It embodies new components and innovative circuits coupled with the best elements of the previous generation.
Degeneration, “the other form of feedback”, has been eliminated. The output stage consists of a single pair of 800 watt new generation output transistors operating push-pull Class A. The result is faster, lower distortion, lower noise, higher damping and larger Class A operating envelope into low impedance loudspeakers, all in a simple 3 stage circuit with total of three pair of push-pull gain transistors.
Pass Labs HPA-1 Headphone Amplifier
The HPA-1 headphone amplifier was designed ground-up to become what we believe is one of the very best sounding headphone amplifiers available today. With low feedback, wide bandwidth and a direct coupled MOSFET output stage, this musical instrument drives even the most difficult headphone loads with ease, power and grace. The HPA-1 also functions as a line-level preamplifier that sonically rivals much higher-priced competition. The measured performance is superb and the sound even better.
Pass Labs INT-25 Integrated Amplifier
Pass Labs INT-25 Integrated Amplifier - At Pass Labs, we build Fet amplifiers with excessive output stages, huge heat sinks and massive power supplies. We use the highest quality components in simple linear topologies, assembled and tested with care and subtlety. They measure well, sound great, and are reliable. Twenty plus years of ongoing innovation have kept the X and XA amplifiers at the forefront of high-end audio.
The Pass Labs INT-25 Integrated Amplifier embodies all this and less. A smaller stereo Class A amplifier at a lower price, it takes advantage of the lower power requirements to have simpler single-ended circuitry and fewer parts in the signal path. This also allows elimination of degeneration, “that other negative feedback” in all stages.
Download Owners Manual
Pass Labs INT-250 Integrated Amplifier
Like the INT-60, the INT-250 utilizes the synergies developed in the .8 series power amplifiers. Unlike the INT-60, however, it brings 250 watts per channel of listening pleasure. With higher power MOSFETs and more of them, the INT-250 drives large, demanding and relatively inefficient loudspeakers at higher volumes without batting an eyelash, singing beautifully. Just incredible music from one component.
Pass Labs INT-60 Integrated Amplifier
This integrated amplifier sets a new benchmark in significantly narrowing any perceived performance gap between separate components and integrated amplifiers. Advanced technologies and real-world testing combine to create the INT-60 which presents 60 glorious watts per channel into 8 ohms, and doesn't leave class A until 30 watts thanks to its high-bias operation. This larger class A operating envelope brings lower distortion and greater loudspeaker control, delivering higher quality musical fidelity for your enjoyment.
Pass Labs X150.8 150 Watt Stereo Power Amplifier
As the entry-level class A/B stereo power .8 amplifier, the X150.8 features many of the same technical and sonic attributes of its larger brethren. It features 150 watts per channel, 100K ohm input impedance and operates “higher” into Class A than its predecessors. But knowing the ear is not a microphone and the brain is not a tape recorder, we've designed this model to bridge the gap between measured performance and outstanding subjective musical experience. Simply put, the X150.8 will compel you to listen to your entire music collection again and again.
Pass Labs XA-30.8 – 30 Watt Class A Stereo Power Amplifier
An exceptional stereo power amplifier on many levels -- high-biased MOSFETs providing higher-power class A operation, direct-coupled front-end circuitry for exceptionally high stability and larger, more robust heats sinks similar to those of the larger .8 amplifiers. The list goes on, but listening may tell you the XA30.8 represents a value high-point -- quite possibly your particular optimal balance between performance and cost.
Pass Labs XA25 – 25 watt Stereo Power Amplifier
The new XA25 offers great sound at slightly lower power, without frills, at a lower price. It embodies new components and innovative circuits coupled with the best elements of the previous generation.
Degeneration, “the other form of feedback”, has been eliminated. The output stage consists of a single pair of 800 watt new generation output transistors operating push-pull Class A. The result is faster, lower distortion, lower noise, higher damping and larger Class A operating envelope into low impedance loudspeakers, all in a simple 3 stage circuit with total of three pair of push-pull gain transistors.
Pass Labs XP-17 Phono Amplifier
XP17 uses the new-shielded low noise toroid and input filter module, like the XP-12. The power supply has an extra stage of RC filtering. We have lower radiated and mechanical noise.
The XP17 has an all-new input circuit that is symmetrical and lower in noise and distortion with greater drive capability. Noise is the most prominent part of THD+N in the first section of a phono stage. By lowering noise we get better resolution and dynamics.
Designed with a split EQ network like the XP 25 and XS Phono that is more accurate and can handle greater signal levels.
The secondary stage runs a higher bias output stage with auto bias.
The numerous loading options from the XP-15 are all still available and three gain settings to accommodate low output MC to MM cartridges.
Pass Labs Xs 300 300 Watt 2 Chassis Mono Power Amplifier
The Xs series monoblock power amplifiers represent the reference-quality, state-of-art amplifiers from Pass Laboratories. Through years of "spare no effort" endeavor, they represent the true pinnacle of music reproduction. The Xs 300 delivers 300 watts, employs separate power supply and amplifier chassis' for lower noise and utilizes higher-power constant-current source. Single-ended bias current not only lowers distortion, but facilitates better control of its harmonic structure, tweaked and optimized through endless listening tests for your musical pleasure.
