Phasemation MA-1500 Monaural Power Amplifier (Pair)

£19,995.00

Pair of 300B Single-Ended Tube Monaural Power Amplifier which can reproduce the musical reality and even the artist’s passion, from deep within a recording.
Description

2 x 10 Watt 300B Class A Power Amplifier

Features:

  • Toshiba 6CG7 for the transformer-coupled circuit driving PSVAN 300B ended-tube optimally
  • Specially designed non-feedback amplifier by adopting triode tubes in all stages
  • Output transformer and inter-stage transformer made by LUNDAHL in Sweden
  • Two independent power choke transformers
  • Specifically designed to decreasing noise
  • Rectifier tube 5R4G which does not generate a switching noise in principle against a high voltage power supply
  • Rectifier circuits composing of choke transformers
  • 300B heaters directly driven by DC power supplies
Specifications:
Product 300B Single-Ended Monaural Power Amplifier
Input impedance 47k ohms
Gain 26dB
Residual noise 200µV or less : A-NET
Rated output 10W or more (THD:5%)
Frequency characteristics 10 – 40kHz (+0,-3dB)
Output impedance 4 ohms, 8 ohms
Power consumption 100W (100VAC 50~60Hz)
External dimensions (mm) 245 (W)×226(H)×427(D)
Weight 16kg
Accessories AC power cable

Amplifiers

Clearaudio Accus Plus Battery-Powered Power Supply

Original price was: £800.00.Current price is: £400.00.
Battery power supply for 'Plus' phono preamplifiers : BASIC +, SYMPHONO +, BALANCE + The innovative option of this Clearaudio Accu+ power supply resides in the fact that Clearaudio uses state-of-the-art next-generation NIMH batteries as power supply source. This technology delivers a very clean current, without any unwanted noise and distortion on the audio signal. When combined with a Clearaudio phono preamplifier of the range 'Plus', we were surprised by the level of transparency and the dynamics of this Accu Plus battery-powered power supply. It brings the performances of the manufacturer's great preamplifiers to a whole new level!

Clearaudio Basic V2 Phono Stage

Original price was: £1,140.00.Current price is: £740.00.
There’s nothing basic about the basic V2 phono stage. Don’t be fooled by its cool, minimalist design. Within that sleek aluminum casing (with silver or black anodized finish) lies an inner world of highly refined features. Its predecessor, the basic plus, was a multiaward winner and with the V2 we’ve taken all of that coveted ‘Plus’ technology up a notch.

Ex-Dem Canor AI 2.10 Integrated Hybrid Amplifier

Original price was: £3,250.00.Current price is: £2,000.00.
CANOR AI 2.10 is a hybrid integrated amplifier with an output power of 2 x 150 W / 4 Ω. Complete with all original packaging. Retails at £3250 selling for £2750

First Watt F7 Power Amplifier

£4,000.00
The F7 is a very unique power amplifier.
Aa two-stage push-pull JFET/MOSFET topology with fewer parts than any First Watt amplifier to date and incorporating a very interesting balance of very low negative voltage feedback and a little bit of positive current feedback to give an astonishing measure of control over reactive loudspeaker loads.
   

First Watt SIT-4 Power Amplifier

£4,995.00
The SIT-4 is the First Watt power amplifier using the industrial grade Static Induction Transistors. It is preceded by the ground breaking SIT-1, 2, and 3 and follows their technical philosophy and construction. An important difference in the SIT-4 is the SIT device itself. The previous three designs used Silicon Carbide to make a custom vertical power Jfet with a low impedance Drain whose character nicely emulated a power Triode tube, but directly operating at the current and voltage that would drive loudspeakers without the requirement for an output transformer. SITs lend themselves to high quality audio performance with very simple Class A circuits with little or no dependence on other active circuit elements or negative feedback.

First Watt Sit-5 Power Amplifier

£4,995.00
The SIT-5 is the most recent amplifier produced by First Watt, and is the fifth to use a Static Induction Transistor (SIT) as the power amplifying device. In 2011 we introduced our first SIT amplifier using a custom Silicon Carbide (SiC) transistor part made by SemiSouth. The amplifier also used a single power device, operating without feedback in single-ended Class A Common-Source mode to deliver 10 watts of power emulating the characteristic of a Triode, but operating at voltage and currents directly needed by loudspeakers, eliminating the output transformer.
Price is per unit
Additional information
Weight 16 kg
Brand

Phasemation

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.