Mains
DIY
HiFi Cables
Power Supplies
Computer Audio
Vinyl Essentials
HiFi Equipment
Speakers
Headphones
Music
HEXMAT Eclipse Vinyl Isolator
Enhance your experience with HEXMAT Phono Record Isolator
• Even Smaller Contact Surface* • 3mm Diameter Specially Mounted Spheres** • 2mm Extruded Polymer Blend Body Exclusive to Us*** • Better Live Soundstage* • Perfect Transients and Timing* • Excellent Dynamics* • Impressive Stereo Image and Channel Separation* • Opened, Spacious Transparent Sound* • Music Without Restraint* • Anti-Static Feature • Full Torque Transfer • 3mm Overall Thickness • 7”/ 10”/ 12” Record CompatibilityRead Review
HEXMAT Molekula Record Weight
Hexmat Zero Isolation Feet
From the makers of the Eclipse and yellow bird turntable mat comes a new design of isolation footer called Zero.
Available in a set of 3 (a 4th can be added if required) with various load ratings from 1kg to 30kg (combined load of equipment being placed on the feet).
Sold in a set of 3 for £360
3 different load ratings
1-6kg
5-15kg
10-30kg
HUGH MASEKELA – HOPE – ANALOGUE PRODUCTIONS 45RPM VINYL
IKEDA 9TS MC CARTRIDGE
- Output Voltage: 0.35mVrms (1kHz 35.4mm/sec., at 45°peak)
- Coil Impedance: 6.0 ohms (1kHz)
- Appropriate Stylus Force: 2.0grams ±0.2 grams
- Frequency Response: 10Hz ～ 45kHz
- Channel Separation: over 27dB (1kHz)
- Channel Balance: within 1.0dB (1kHz)
- Stylus Chip: Oval-shaped solid Diamond
- Cantilever: Double layered duralumin pipe.
- Weight: 10 grams
- Compliance: 7 x 10-6cm/dyne
Ikeda 9TT MC Cartridge
Product Specifications:
Electromagnetic Generator: Moving Coil (MC)
Output Voltage: 0.16mVrms (1kHz 35.4mm/sec. at 45°peak)
Coil Impedance: 2.0 ohms (1kHz)
Appropriate Stylus Force: 1.8 grams ±0.2 grams
Frequency Response: 10Hz - 45kHz
Channel Separation: Over 27dB (1kHz)
Channel Balance: Within 1.0dB (1kHz)
Stylus Chip: Solid Diamond, Line Contact
Cantilever: Double layered duralumin pipe
Weight: 10 Grams
Ikeda HBC-MS-5000DR Tonearm Cable
The HBC-MS-5000 series, which is the product of many years of basic research and has excellent transmission efficiency, is a high-quality cable that uses a hybrid structure made of high-purity 6N copper and OFC material.
If you use it to connect your tone arm, you will enjoy a high S/N ratio, high density, and unparalleled natural sound.
The plug is machined with high precision, and the surface treatment is rhodium plating.
The structure of each connector is assembled using Teflon resin with good insulating properties.
The shield is braided with over 90% polyurethane (black).
Ikeda IS-2T Headshell
- Body : Aluminum Alloy.
- Net weight : 20 grams.
- Attached lead wire : 6N copper.
- Adjustment of overhang: 2 positons movable with 10 mm adjustable.
- Adjustment of balance to left and right: Adjustable.
- Lock pin: 2 pieces.
- Shell terminal: Brilliant Rhodium plating. (10 times costly to gold.)
- Lead wire terminal: Brilliant Rhodium plating. (10 times costly to gold.)
- Connector: Made of Titanium Alloy by cutting from a solid piece.
IKEDA KAI MC CARTRIDGE
- Electromagnetic Generator : Moving Coil (MC)
- Output Voltage : 0.19mVrms (1kHz 35.4mm/sec. at 45° peak)
- Coil Impedance : 2.5 ohms.(1kHz)
- Appropriate Stylus Force : 1.8 grams ± 0.2 grams
- Frequency Response Range: 10Hz ~ 45kHz.
- Channel Separation : over 27dB (1kHz)
- Channel Balance: within 1.0dB (1kHz)
- Stylus Chip : Micro-ridge sold pure diamond.
- Cantilever: made of Boron
- Weight : 11.5 grams
- Compliance : 7 x 10-6 cm/dyne
IKEDA SAI MC CARTRIDGE
- MC cartridge: Universal type dedicated to tonearm.
- Output Voltage: 0.3 mVrms (1kHz 35.4mm/sec., at 45°peak)
- Coil Impedance: 2.5 ohms (1kHz)
- Appropriate Stylus Force: 2.0grams ±0.2 grams
- Frequency Response: 10Hz ～ 45kHz
- Channel Separation: over 30dB (1kHz)
- Channel Balance: within 0.5dB (1kHz)
- Stylus Chip: Micro-ridge solid Diamond
- Cantilever: made of Boron.
- Weight: 30 grams
- Compliance: 7 x 10-6cm/dyne
