Mains
DIY
HiFi Cables
Power Supplies
Computer Audio
Vinyl Essentials
HiFi Equipment
Speakers
Headphones
Music
Main Features
Strong chassis structure of a 2 unit box with Lch and Rch being independent and completely monaural.
V-I / I-V conversion type all-stage symmetrical non-feedback amplifying circuit due to all discreet parts.
Three input terminals are equipped and MM/MC switching is possible for each. In addition, inputs 1 and 2 support balanced inputs due to the XLR connector.
A 2nd order CR type low cut filter with non-feedback is equipped. Plays warped phonograph records without any music deterioration and prevents the speakers (woofers) from shaking.
Three types of playing curve changeover switches are equipped. For the equalizer characteristics, along with the RIAA characteristics for the previous stereo, Mono1 (used on the DECCA label and so forth) and Mono2 (used on the Colombia label and so forth) are equipped as a particular characteristic for a monaural. This will allow higher fidelity playback than the DECCA and Columbia labels.
A “degaussed” circuit is equipped.
By choosing “degauss” with the functions and playing the record for about 30 seconds, the MC cartridge with a metal core that was magnetized is degaussed and the sound quality becomes clear.
High Quality Parts throughout by ELNA, Rohm, Zenier
Product Specification
| Form | V-I/I-V conversion type all-stage symmetric non-feedback equalizing amplifier | |
| Input Type (Cartridge) | MM | MC |
| Input Sensitivity | 2.5 mV | 0.13 mV |
| Suitable Cartridge Output Impedance | 47 kΩ or less | 1.5 to 40Ω |
| Gain | 38 dB | 64 dB |
| Input Equivalent S/N Ratio | –120dBV | –140dBV |
| Rated Output Voltage | 200 mV (1kHz) | |
| Rear Curve Tolerance | ± 0.5 dB (20Hz to 20kHz) | |
| Power Consumption | 10W (100VAC 50 – 60Hz) for each Ch | |
| Dimensions | 211 (W) × 93 (H) ×360 (D) | |
| Weight | 5.5kg for each Ch | |
Amplifiers
Ex-Dem Canor AI 2.10 Integrated Hybrid Amplifier
Ex-Dem LAB12 Integre 4 Mk2 Integrated Amplifier
Ex-Dem Thivan Labs 211 Gold Swan Integrated Amplifier
- 1 unit ex-dem
- Please enquire for shipping cost if outside the UK
- The SWAN 211 Single-ended version’s sound quality is similar to that of the 211SE Anniversary version (the 2-blocked type). However, it is beautifully designed to be contained in one neat amplifier block. This one-block design, compared to the 211 SE Anniversary series, enables the Swan 211 to easily fit in narrow spaces.
First Watt F7 Power Amplifier
The F7 is a very unique power amplifier.
Aa two-stage push-pull JFET/MOSFET topology with fewer parts than any First Watt amplifier to date and incorporating a very interesting balance of very low negative voltage feedback and a little bit of positive current feedback to give an astonishing measure of control over reactive loudspeaker loads.
First Watt SIT-4 Power Amplifier
Reviews
There are no reviews yet.