Mains
DIY
HiFi Cables
LATEST PRODUCTS
-
Furutech Fig.8 Mains Power Lead, 1.5 Metres £195.00 – £302.00Price range: £195.00 through £302.00
-
Mains Cables R Us No.11 Power Lead
Rated 5.00 out of 5£65.00 – £158.00Price range: £65.00 through £158.00 -
Belden 19364 Audio-Grade Mains Cable sold per metre for DIY
Rated 4.75 out of 5£12.00
-
Power Supplies
ON SALE NOW
-
Oyaide PA-2075 DR Tone-Arm Cable £265.00
-
Oyaide C-037 Rhodium/Silver Plated IEC Connector OFFER
Rated 5.00 out of 5£102.00Original price was: £102.00.£72.00Current price is: £72.00.
-
Computer Audio
FEATURED PRODUCTS
-
Tellurium Q Black II Speaker Cables
Rated 5.00 out of 5£119.00 – £952.00Price range: £119.00 through £952.00 -
Linear Power Supply For Clearaudio Turntables
Rated 5.00 out of 5£240.00 – £595.00Price range: £240.00 through £595.00
-
Vinyl Essentials
Latest Products
-
Oyaide PA-2075 DR Tone-Arm Cable £265.00
-
Furutech AG-12 Phono Cable
Rated 4.50 out of 5£550.00
-
Accessories
HiFi Equipment
Speakers
Headphones
Music
Profile in brief: WBT-0735:
- Extremely high contact pressure for spades thanks to fine thread and cross-milled surface
- Pat. two-piece clamping nut for maximum strength of connection
- Solder or crimp connection with Torx screw
- CE and IEC compliant thanks to full Makrolon insulation
- 24 carat multi layer gold plating (nickel-free)
- Max. constant current 70 A
- Twist-proof mounting
- Puzzle plate system
Outer connection
>> 4 mm banana plug
A 4 mm banana plug can be connected in the front part of the clamping nut.
>> Spades and crimped cable ends (up to 6 mm²/9 AWG)
You can use the patented WBT clamping nut system to make high-pressure spade and crimped cable end connections. The cross-milled surface on the bottom of the pressure piece creates a permanently secure connection with extremely low transition resistance. It also prevents the splitting of cable strands if exposed cable ends are used.
Inner connection
Cables with a conductor cross section of up to 10 mm² (7 AWG) can be used on the inside.
WBT recommends the crimp connection method. You can use the supplied Torx screwsand the Torx T.6 wrench to perfectly fix crimped cable ends.
The connections can also be soldered, however. If you decide on soldering, WBT recommends the surface-friendly silver solder WBT-0800 (see also solder connection).
Mounting
Mounting insulators are supplied and ensure not only insulated but also twist-proof mounting and polarity identification. Counter nuts, double step washers with lug and puzzle plates are also supplied. The puzzle plates can be clipped into one another. This ensures precise terminal spacing of 19 or 30 mm, but above all absolute torsion protection. The nuts on appliances with high intrinsic mechanical vibration levels like loudspeakers should be additionally secured – using the WBT serrated lock washer WBT-9150, for example. In case a fixed distance of 19 mm is required, one may use the spacer WBT-9404 and install the WBT-0735 as a double terminal. Thanks to the locking slots in the spacer the inlet opening for the connection cable can be rotated in steps of 45°.
(WBT-9404 is supplied with each end consumer package, but in general needs to be ordered separately.)
Explanatory notes:
Hint for OEMs
Due to the current safety regulations, the 4 mm banana holes of WBT pole terminals should be closed using the safety stick WBT-0799.
Specifications:
Conductor cross section (max.): | outside: 6 mm² (9 AWG) inside: 10 mm² (7 AWG) |
---|---|
Connection technology: | outside: 4 mm banana plug, spades (6 – 8 mm spade), crimping inside: crimping or soldering |
Wall thickness: | 0.1 – 6 mm |
Identification: | red/white |
Installation: | with the spacer WBT-9404 also as a double terminal |
Recommended tool: |
|
Reviews
There are no reviews yet.