Ikeda 9TT MC Cartridge

£2,895.00

Product Specifications: 

Electromagnetic Generator: Moving Coil (MC)

Output Voltage: 0.16mVrms (1kHz 35.4mm/sec. at 45°peak)

Coil Impedance: 2.0 ohms (1kHz)

Appropriate Stylus Force: 1.8 grams ±0.2 grams

Frequency Response: 10Hz – 45kHz

Channel Separation: Over 27dB (1kHz)

Channel Balance: Within 1.0dB (1kHz)

Stylus Chip: Solid Diamond, Line Contact

Cantilever: Double layered duralumin pipe

Weight: 10 Grams

Description

The Ikeda 9TT is specially designed and developed with the concept that a cartridge should be easier to handle, by inheriting the characteristics of competent ability for the sonorous expression power attained with the former cantileverless IKEDA 9 series cartridges.

The body is made of a solid aluminum alloy by lathing a piece of aluminum precisely one by one in order to hold the generator unit firmly.

The cantilever is made of a double layered duralumin pipe in order to reduce its actual weight and any possible warping affecting the sound badly, in addition to gaining stiffness.

The sound sources picked up by the line contact architecture of the stylus chip will be precisely delivered to the magnetic coils. In addition, thanks to the highly efficient Permalloy core, low impedance coils, very strong neodymium magnet and an ideally shaped magnet yoke, it is possible to purely reproduce the sound without having any redundant coloring of sound.

In order to pick up the hidden sound elements and a glamour of sounds itself engraved on LPs/SPs in addition to the fulfillment for various conditions required for the best phono cartridge as a reproducing device, we always spend plenty of time to fabricate and then make an alignment repeatedly.

Cartridges

Acoustical Systems – Titanium SMART Screws

£175.00
These titanium SMART screws are corrosion-resistant which can withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio and are about 40% lighter than steel screws.

Acoustical Systems Fideles Cartridge

£950.00
If you want the ultimate MM cartridge this could be it. 5.5mV output so no step up transformer required.

Acoustical Systems The SMARTractor Phono Alignment Tool

£599.00
For the serious audiophile who is interested in aligning - if only periodically -their analogue front-end to the utmost precision does look for precision which comes handy and which is easy to operate. To answer this request we have designed the SMARTractor - a direct off-spring of our UNI-Protractor. The SMARTractor brings the same unparalleled precise tangential alignment for which the UNI-Protractor earned it’s laurels - PLUS the 0.05mm precise mounting distance measurement of the UNI-P2S.

Audio Technica AT-VM95E Elliptical Cartridge

£49.95
The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.
Additional information
Brand

Ikeda

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.