Mains
DIY
HiFi Cables
Power Supplies
Computer Audio
Vinyl Essentials
HiFi Equipment
Speakers
Headphones
Music
Pass Labs INT-25 Integrated Amplifier
Pass Labs INT-25 Integrated Amplifier - At Pass Labs, we build Fet amplifiers with excessive output stages, huge heat sinks and massive power supplies. We use the highest quality components in simple linear topologies, assembled and tested with care and subtlety. They measure well, sound great, and are reliable. Twenty plus years of ongoing innovation have kept the X and XA amplifiers at the forefront of high-end audio.
The Pass Labs INT-25 Integrated Amplifier embodies all this and less. A smaller stereo Class A amplifier at a lower price, it takes advantage of the lower power requirements to have simpler single-ended circuitry and fewer parts in the signal path. This also allows elimination of degeneration, “that other negative feedback” in all stages.
Download Owners Manual
Pass Labs INT-60 Integrated Amplifier
This integrated amplifier sets a new benchmark in significantly narrowing any perceived performance gap between separate components and integrated amplifiers. Advanced technologies and real-world testing combine to create the INT-60 which presents 60 glorious watts per channel into 8 ohms, and doesn't leave class A until 30 watts thanks to its high-bias operation. This larger class A operating envelope brings lower distortion and greater loudspeaker control, delivering higher quality musical fidelity for your enjoyment.
Pass Labs XA25 – 25 watt Stereo Power Amplifier
The new XA25 offers great sound at slightly lower power, without frills, at a lower price. It embodies new components and innovative circuits coupled with the best elements of the previous generation.
Degeneration, “the other form of feedback”, has been eliminated. The output stage consists of a single pair of 800 watt new generation output transistors operating push-pull Class A. The result is faster, lower distortion, lower noise, higher damping and larger Class A operating envelope into low impedance loudspeakers, all in a simple 3 stage circuit with total of three pair of push-pull gain transistors.
Pass Labs HPA-1 Headphone Amplifier
The HPA-1 headphone amplifier was designed ground-up to become what we believe is one of the very best sounding headphone amplifiers available today. With low feedback, wide bandwidth and a direct coupled MOSFET output stage, this musical instrument drives even the most difficult headphone loads with ease, power and grace. The HPA-1 also functions as a line-level preamplifier that sonically rivals much higher-priced competition. The measured performance is superb and the sound even better.
Pass Labs XP-27 Phono Preamplifier
The twin chassis XP-27 eclipses the already exceptional performance of the well-reviewed and well-received XP-15, XP-25 & XP-17: delivering enhanced RIAA performance at a fraction of the previous distortion. The new design uses double shielded low noise toroidal transformers in external supply connected via aviation grade circular connectors using silver over oxygen free copper. The power supply is dual mono with two transformers with lower radiated and mechanical noise. Noise is the most prominent part of THD+N at low levels, so by lowering noise we get better resolution and dynamics.The XP-27 input and gain circuitry are similar to that found in the Xs Phono. This means switching and loading is done at higher signal levels, minimizing noise and improving low level performance.
Pass Labs XP-32 Preamplifier
The XP-32 is a three-piece modular preamplifier consisting of one control/power supply chassis and two additional gain chassis each containing analog signals of a single channel.
The XP-32 generates less noise, crosstalk and distortion while delivering greater dynamic range, gain, output voltage and output current. But it is the sound, not the technical excellence, that truly makes this a breakthrough instrument.
Pass Labs XP-22 Preamplifier
The new design uses double-shielded low noise toroidal transformers in external supply
The new design uses double-shielded low noise toroidal transformers in an external supply connected via aviation-grade circular connectors using silver over oxygen-free copper. The power supply is dual mono with two transformers with lower radiated and mechanical noise. Noise is the most prominent part of THD+N at low levels, so by lowering noise we get better resolution and dynamics.
The gain circuitry continues to use our favorite transistors from Toshiba but has a larger, higher biased, output stage like the Xs Preamp, and includes auto bias.
The larger output stage makes longer, and multiple cable runs easier to drive and gives us the advantage of simplifying our single-ended output circuitry while increasing performance.
The volume control is a single stage instead of two stages and has more range; it is quieter and more accurate. This is the same volume control as used in the XP-30.
Overall this makes for a quieter, more neutral, musical, and versatile control center for your system.
The XP-22 measures spectacularly well — but it really stands out sonically.
Pass Labs XP-12 Preamplifier
The new XP-12 starts with a new power supply. It uses an efficient toroidal design with both an electrostatic and Mu metal shield along with vacuum impregnating and epoxy fill. This gives us a very quiet transformer both electrically and mechanically.
The power supply circuitry itself is also lower noise and has additional filtering, a little more complicated but worth it.
The XP-12 uses the single stage volume control borrowed from the XS line preamp. This gives us one hundred 1 dB steps with lower noise and distortion while removing some signal path parts.
The gain circuitry continues to use our favorite transistors from Toshiba but has a larger higher biased output stage similar to the XS preamplifier auto bias. This makes longer and multiple cable runs easier to drive and gives us the advantage of simplifying our single ended output circuitry while increasing performance. Overall this makes for a quieter more neutral, musical and versatile control center for your system.
Pass Labs X250.8 Stereo Amplifier
This stereo class A/B model represents a step up in power and performance from the X150.8 and, like all of our products, has been painstakingly designed, tweaked, redesigned and fine-tuned to deliver maximum musical enjoyment. This hard work and creativity results in a greater “look-back” at the original musical performance, conveying additional insight to the artist’s creative intent. Isn't that what it's all about?
Pass Labs X350.8 Stereo Amplifier
At 350 watts per channel class A/B, the X350.8 is the largest and most powerful stereo power amplifier of Pass Labs line-up. Because we care more about how holistic design affects the musical experience and relatively less about how parts affect specifications, you can expect superb and accurate representation of the recording performance and venue, as well as the distinctive layering of instruments captured faithfully.
Pass Labs X260.8 Mono Block Amplifier
The X260.8 is a refined musical instrument delivering 260 watts into 8 ohms, and combines power and finesse with all the benefits of mono-block performance. Its measured performance - distortion, bandwidth, noise, and resolution is beyond reproach. Like all of the class A/B .8's, this amplifier has some class A bias, rewarding its listeners with a whole new zenith of sound quality.
Pass Labs X600.8 Mono Block Amplifier
The X600.8 monoblock amplifiers deliver 600 watts into 8 ohms. Even more impressive they effortlessly drive the most demanding loudspeakers to musical nirvana, be the performance full scale orchestra, high-decibel rock band or string quartet. Exhaustive listening tests, not myopic focus on specifications have informed the development of this and the rest of the Pass Labs product offering, and you can hear it.
