Showing all 21 results

LAB12 AC1 High End Audio Power Cable

£595.00£818.00
High End Audio Power Cable by Lab12 £595.00 1.5 meter US version £649.00 1.5 meter UK version £169.00 extra half meter

LAB12 DAC1 Reference

£2,795.00
Free MCRU No. 75 mains lead
  • Input Sampling Rate up to 24bit/192 kHz
  • Non Oversampling mode
  • 8x Multibit Philips DACs network
  • 2x Dual Triodes tubes I/V analog output stage
  • 6 Separate Regulated Power Supplies
  • Analog retro Nissei VU meters
  • 6mm Aluminum face panel
  • Five Years Guarantee
 

LAB12 DIG1 Digital Interconnect

£395.00£590.00
Digital Interconnect interconnect by Lab12 SPDIF 75 ohm coaxial with RCA connectors. AES/EBU 110 ohm with XLR connectors. £395.00 RCA/BNC 1METER £450.00 AES/EBU XLR 1 METER £140.00 extra half meter (stereo)

LAB12 Gordian Mains Conditioner

£1,595.00£1,950.00
  • UK and EU sockets available
  • • 230V/50Hz, 115V/60Hz versions • OLED display • Adaptive EMI RFI filtering • Adaptive Common and differential filters • Adaptive Power Factor correction • Overvoltage protection • FFT analysis • DC voltage analysis • THD analysis • Power consumption analysis • AC voltage, current analysis • Sleep mode system • 5mm Aluminum face panel with luxury painting • Five Years Guarantee

LAB12 HPA OTL Tube Headphone Amplifier – Preamplifier – USB DAC

£1,195.00
This is where it all started for the Lab12. Our love for music and high-end audio was our first and foremost challenge, explored years back throughout the headphone pre-amplifier. Dealing with the fragile signal and transforming it into the true high-end potent audio headphone amplifier is not the task, that everyone dares to explore. Full Review Here

LAB12 INTEGRE4 MK2 AMPLIFIER

£5,495.00
• KT170 Valves • Remote Control • Large OLED display • Blue Velvet ALPS motorized potentiometer • Connectivity and extendibility through I/O Upgrade Modules • Sophisticated protection and bias monitoring system • No feedback design • SRSG® implementation • Gold plated Teflon RCA connectors • Gold plated tube sockets • 5mm aluminum face panel with luxury painting • Five years guarantee

LAB12 Knack MKII Mains Power Lead

£300.00
• EU, US, UK, Swiss power connector versions • 16A (C13) or 20A (C19) IEC connector versions • Independent braided copper shield to phase and neutral cores • High grade red copper, gold plated connectors • Rating: 115-240V AC 16 Amp continuous current • Total conductor thickness: 3x6mm² (10AWG) • Cable resistance: 3,40 mΩ /m • Internal capacitance: 150pF /m • Internal inductance: 2.80 uH /m • Length: 1, 5 meters (custom length available)

LAB12 Knack MKII Mains Power Lead Clearance Special

£200.00
One only ready to ship. Terminated with EU schuko plug and C19 high current IEC connector.
1.5 metres long was £300 now £200
• Independent braided copper shield to phase and neutral cores • High grade red copper, gold plated connectors • Rating: 115-240V AC 16 Amp continuous current • Total conductor thickness: 3x6mm² (10AWG) • Cable resistance: 3,40 mΩ /m • Internal capacitance: 150pF /m • Internal inductance: 2.80 uH /m • Length: 1, 5 meters

LAB12 Melto1 Valve MC/MM Phono Preamplifier

£1,995.00
Vinyl is back.. though it was never really gone! More and more music lovers turn to analog sources, since they offer a more natural and original feeling in the perception of sound. So, here comes the newest member of our range melto1, to bring audiophiles a step closer to the true analog sound. Phono stages are the main supporting links in the chain of any high-end sound system. When designing melto1, we had in mind to bring to the fore a thoroughly musical phono stage, which will engage audiophiles to the analog sound and its benefits. Without compromising on the absolute musicality and pure recreation of sound, we managed to smoothly handle the sensitive cartridge signal and give you the opportunity to get the best possible from your turntable / cartridge system, through a variety of setting combinations.

LAB12 MELTO2 PHONO PRE-AMPLIFIER

£3,495.00
A Phono preamplifier represents the utmost challenge for any high-end audio designer and company. Melto2 is a full tube, remotely controlled phono stage with high quality OLED display, where all important functions are clearly visible and easily selectable in real time.

LAB12 MIGHTY POWER AMPLIFIER

£1,895.00
• EL34, 6550, KT88 compatible (EL34 from factory) • Triode / ultra linear selector switch • No feedback design • SRSG® implementation • Fine symmetry® implementation • Gold plated Teflon RCA connectors • Gold plated tube sockets • Analog retro Nissei VU meters • 5mm aluminum face panel with luxury painting • Five years guarantee

LAB12 Noyra Mains Power Conditioner

£895.00£1,250.00
In our continuing quest to perfect the mains and give the end user the best possible performance from hi/her hifi system MCRU present the LAB12 Noyra mains conditioner. 6 sockets housed in a smart metal enclosure with a 5mm thick front plate. Available with UK, US or EU (Schuko) outlet sockets on the back panel.

LAB12 PH1 Analogue Phono Interconnect

£750.00£975.00
Analog phono interconnect cable by Lab12
Standard Length - 1m
Additional Length - 1.5m

LAB12 PRE1 CLASS A VALVE PRE-AMPLIFIER

£1,750.00
When the musical vibrancy and sparkling audio energy are properly in harmony, only then can a pure Class A tube preamplifier deliver unsurpassed sonic performance.

LAB12 RCA1 Analogue RCA Interconnect

£675.00£900.00
Connection Series Analogue RCA interconnect by Lab12
Standard Length - 1m
Additional Length - 1.5m

LAB12 SP1 Speaker Cables

£995.00£1,435.00
Connection Series Speaker Cables by Lab12
£995.00 single wire 2 meters
£290.00 extra half meter (stereo) SINGLE
£1095.00 biwiring  2 meters
£340.00 extra half meter (stereo) BIWIRE
 

LAB12 SUARA POWER AMPLIFIER

£4,795.00
The attractive simplicity and purity of class A single ended power amplifiers are imprinted in Suara, a high-fidelity audiophile Parallel tube Class A power amplifier.

LAB12 SUONO POWER AMPLIFIER

£2,995.00
• 6550, KT88 compatible (KT150 from factory) • Manual Bias Adjustment • Triode / ultra linear selector switch • No feedback design • SRSG® implementation • Fine symmetry® implementation • Gold plated Teflon RCA connectors • Gold plated tube sockets • Analog retro Nissei VU meters • 5mm aluminum face panel with luxury painting • Five years guarantee

LAB12 TRUE PRE-AMPLIFIER

£625.00
True was designed as a mighty and potent passive high-end audio hub with multiple inputs and ultra transparent, yet musical volume control. As all Lab12 products, the true also comes with the choice of multiple luxury paint finishes.
Mono and Stereo Review...Click here to read

LAB12 USB1 Digital Interconnect

£485.00£600.00
Connection series USB cable by Lab12 £485 I Metre £115 extra half metre

LAB12 XLR1 Analog XLR Interconnect

£675.00£900.00
Connection series XLR analogue interconnect by Lab12
Standard Length - 1m
Additional Length - 1.5m