Showing 1–12 of 21 results

LAB12 AC1 High End Audio Power Cable

£595.00£818.00
High End Audio Power Cable by Lab12 £595.00 1.5 meter US version £649.00 1.5 meter UK version £169.00 extra half meter

LAB12 USB1 Digital Interconnect

£485.00£600.00
Connection series USB cable by Lab12 £485 I Metre £115 extra half metre

LAB12 DIG1 Digital Interconnect

£395.00£590.00
Digital Interconnect interconnect by Lab12 SPDIF 75 ohm coaxial with RCA connectors. AES/EBU 110 ohm with XLR connectors. £395.00 RCA/BNC 1METER £450.00 AES/EBU XLR 1 METER £140.00 extra half meter (stereo)

LAB12 SP1 Speaker Cables

£995.00£1,435.00
Connection Series Speaker Cables by Lab12
£995.00 single wire 2 meters
£290.00 extra half meter (stereo) SINGLE
£1095.00 biwiring  2 meters
£340.00 extra half meter (stereo) BIWIRE
 

LAB12 XLR1 Analog XLR Interconnect

£675.00£900.00
Connection series XLR analogue interconnect by Lab12
Standard Length - 1m
Additional Length - 1.5m

LAB12 PH1 Analogue Phono Interconnect

£750.00£975.00
Analog phono interconnect cable by Lab12
Standard Length - 1m
Additional Length - 1.5m

LAB12 RCA1 Analogue RCA Interconnect

£675.00£900.00
Connection Series Analogue RCA interconnect by Lab12
Standard Length - 1m
Additional Length - 1.5m

LAB12 Knack MKII Mains Power Lead Clearance Special

£200.00
One only ready to ship. Terminated with EU schuko plug and C19 high current IEC connector.
1.5 metres long was £300 now £200
• Independent braided copper shield to phase and neutral cores • High grade red copper, gold plated connectors • Rating: 115-240V AC 16 Amp continuous current • Total conductor thickness: 3x6mm² (10AWG) • Cable resistance: 3,40 mΩ /m • Internal capacitance: 150pF /m • Internal inductance: 2.80 uH /m • Length: 1, 5 meters

LAB12 Melto1 Valve MC/MM Phono Preamplifier

£1,995.00
Vinyl is back.. though it was never really gone! More and more music lovers turn to analog sources, since they offer a more natural and original feeling in the perception of sound. So, here comes the newest member of our range melto1, to bring audiophiles a step closer to the true analog sound. Phono stages are the main supporting links in the chain of any high-end sound system. When designing melto1, we had in mind to bring to the fore a thoroughly musical phono stage, which will engage audiophiles to the analog sound and its benefits. Without compromising on the absolute musicality and pure recreation of sound, we managed to smoothly handle the sensitive cartridge signal and give you the opportunity to get the best possible from your turntable / cartridge system, through a variety of setting combinations.

LAB12 DAC1 Reference

£2,795.00
Free MCRU No. 75 mains lead
  • Input Sampling Rate up to 24bit/192 kHz
  • Non Oversampling mode
  • 8x Multibit Philips DACs network
  • 2x Dual Triodes tubes I/V analog output stage
  • 6 Separate Regulated Power Supplies
  • Analog retro Nissei VU meters
  • 6mm Aluminum face panel
  • Five Years Guarantee
 

LAB12 PRE1 CLASS A VALVE PRE-AMPLIFIER

£1,750.00
When the musical vibrancy and sparkling audio energy are properly in harmony, only then can a pure Class A tube preamplifier deliver unsurpassed sonic performance.

LAB12 SUARA POWER AMPLIFIER

£4,795.00
The attractive simplicity and purity of class A single ended power amplifiers are imprinted in Suara, a high-fidelity audiophile Parallel tube Class A power amplifier.