A range of binding posts also known as pole terminals for DIY and as an up-grade over your existing terminals.

Showing all 24 results

ETI Research BP-20C Binding Post

£29.50
The ETI Research BP-20C Binding Post is a superb high-performance Binding Post available at an entry-level price. Made from 1100 Series Hardened Copper with an IAC Rating of 102%. You can rest assured the audio signal is not being degraded by having to go through a poorly conductive material such as Brass.
  • Price is for a single binding post

ETI Research BP-50C Binding Post

£39.50
The ETI Research BP-50C Binding Post is a very high-performance Binding Post at an entry-level price. Made from 1100 series Hardened Copper with an IAC Rating of 102% you can be assured the audio signal is not being degraded having to go through a poorly conductive material such as Brass.
  • Price is for a single binding post

ETI Research Kryo Binding Post

£62.50
The ETI Research Kryo Binding Post is like no other on the market today. The conductor is made from Silver Plated Tellurium Copper for not only superior conductivity but long-lasting durability.
  • Price is for a single binding post

WBT Flat Push-on Cable Shoes (Pair)

New from WBT are these Gold plated spade connectors ideal for connecting your speaker wires to drive units.
Sold in pairs in appropriate sizes.

WBT-0488 Angled Torx

£4.09
Top-quality, professional WBT Torx T.6 offset screwdriver made of chrome-vanadium tool steel, gold-plated

WBT-0702.01 Classic Pole Terminal (Set of 2)

£152.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0702.011 Classic Pole Terminal (Set of 2)

£208.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0702.012 Classic Pole Terminal (Set of 2)

£208.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0703Ag Pole Terminals (Set of 2)

£116.00
  • WBT-0703 Ag
  • Signal conductor made of fine silver
  • CE and IEC compliantnew electrical and mechanical vibration control
  • Free from eddy current effects
  • No problems with mass storage
  • Accepts banana plugs, spades, crimped cable ends (6mmĀ²/11AWG)
  • Max. constant current 30 A, admissible peak current 200 A

WBT-0703Cu Nextgen Pole Terminals (Set of 2)

£60.00
  • WBT-0703 Cu
  • Signal conductor made of pure copper
  • CE and IEC compliantnew electrical and mechanical vibration control
  • Free from eddy current effects
  • No problems with mass storage
  • Accepts banana plugs, spades, crimped cable ends (6mmĀ²/11AWG)
  • Max. constant current 30 A, admissible peak current 200 A

WBT-0705Ag Nextgen Pole Terminal

£196.00£392.00
  • Signal conductor made of fine silver
  • Free from eddy current effects
  • No problems with mass storage
  • CE and IEC compliant
  • Max. constant current 30 A, admissible peak current 200 A
  • Surface protection through nickel-free gold plating

WBT-0705Cu Nextgen Pole Terminal

£140.00£280.00
  • Signal conductor made of fine copper
  • Free from eddy current effects
  • No problems with mass storage
  • CE and IEC compliant
  • Max. constant current 30 A, admissible peak current 200 A
  • Surface protection through nickel-free gold plating

WBT-0708Cu Nextgen Pole Terminal (Set of 2)

£54.00

Less is more - WBT nextgenā„¢ products are convincing proof of this.

The new WBT-0708 nextgenā„¢ pole terminal preserve valuable resources of non-ferrous metals and conduct signals and sounds ā€“ not however, rather exactly for this reason - better than any other before them.

WBT-0710Ag Nextgen Pole Terminal

£160.00£320.00

Virtues of WBT plugs and terminals:

  1. undistorted and low-loss transmission of current and
  2. the plug body and the mechanics are solid, reliable und secure (isolated).

The conventional ā€œclassicā€ connectors are almost always made of brass or brass sheet. They certainly fulfill their tasks, however not precisely enough.

āˆ’ The massive connector body works unavoidably as a mass storage, i.e. it creates a kind of ā€œcapacitor effectā€ and āˆ’ the greater and heavier the terminal, the greater the eddy current.

WBT-0710Cu mC Nextgen Pole Terminal

£88.00£176.00
Thanks to the separation of signal transmission and mechanical stability, it is now possible to use optimum materials for the first time. Signals are transmitted using high-purity copper, one of the best electrical conductors. Copper has severe mechanical limitations, however, and its use is only permitted by an ingenious combination with high-performance plastics. The copper surface is naturally gold-plated to prevent corrosion. Moreover, the soul of the new binding post WBT-0710 Cu mC is of one-piece design, removing all unnecessary transition resistance. The signal conductor is embedded in a matrix of fibre glass and mineral reinforced plastic and equipped with an anti-magnetic stainless steel strut for perfect strain relief. An additional elastomer damping ring keeps oscillations away from the contact level and successfully suppresses any kind of contact microphonics.

WBT-0710Cu Nextgen Pole Terminal

£110.00£220.00

Virtues of WBT plugs and terminals:

  1. undistorted and low-loss transmission of current and
  2. the plug body and the mechanics are solid, reliable und secure (isolated).

The conventional ā€œclassicā€ connectors are almost always made of brass or brass sheet. They certainly fulfill their tasks, however not precisely enough.

āˆ’ The massive connector body works unavoidably as a mass storage, i.e. it creates a kind of ā€œcapacitor effectā€ and āˆ’ the greater and heavier the terminal, the greater the eddy current.

WBT-0718 Impact sound interrupter

£18.00
The impact sound interrupter WBT-0718 has been developed to solve a problem which is generally known. And this is the problem of contact microphony. Constant vibrations, i.e. caused by the impact sound of a loudspeaker cabinet inevitably affect all contact elements. Fluctuations in the transition resistances are the result.These fluctuations result in clearly audible non-linear distortions. Non-linear distortions are incalculable and hence they cannot be corrected. Those who set a high value on high-end inevitably have to deal with this problem. WBT impact sound interrupter comes into operation in the decisive spot ā€“ it acts as an interrupter of the impact sound, and thus it releases contact elements.

WBT-0725 Ag / WBT-0725 Cu Signature Power Bridge / Topline Power Bridge

£18.50£49.00
The power bridges have been designed for bi-wiring in line with our nextgenā„¢ technology. The conductor material consists of pure copper (Cu) or fine silver (Ag) which gives the bridges excellent conductivity. Oxidation of the surface is prevented by the gold plating of the copper version and platinum plating of the silver version. A transparent Makrolon insulation provides 100 % contact protection and CE- and IEC conformity. The WBT-0725 is additionally equipped with inlaid Elastomer for vibration damping. These power bridges can be used with all WBT pole terminals (except the WBT-0702 versions). It is of the utmost importance to respect the vertical distance between the pole terminals to be connected (see below):

WBT-0730.01 Classic Pole Terminal

£102.00£204.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0730.11 Classic Pole Terminal

£152.00£304.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0730.12 Classic Pole Terminal

£152.00£304.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0735 Classic Pole Terminal

£108.00£216.00
Product for the most exacting requirements in terms of signal transmission, mechanical stability and design Superb mechanical properties, solid design and two separate clamping nuts ensure high contact pressure and hence consistently low transition resistance levels ā€“ the precondition for absolutely minimum effects on sound quality. The elegant design of the pole terminal is further enhanced by the multi layer gold-plated surface that reliably prevents corrosion.

WBT-0763 Classic Pole Terminal

£70.00£140.00
The clamping nut is designed to provide a perfect grip. The gold-plated surface prevents any type of corrosion.

WBT-0765 Classic Pole Terminal

£82.00£164.00
The clamping nut is designed to provide a perfect grip. The gold-plated surface prevents any type of corrosion. IC and IEC compliance are achieved by transparent full Makrolon insulation of all live parts.